This guides assume you are using MainConcept's encoder, a free demo is available from the web site, to generate a transport stream to use as input to justdvb-it:
1) Select input files
2) Choose MpegType -> DVB
3) Set NTSC or PAL
4) Click Details
5) Click Advanced
6) Set the bit rate, I suggest constant and 6000 kbps as first test
7) Click Multiplexer tab
8) Set multiplexer bit rate higher than video bitrate, I suggest 8000kbps to get 2000kbps of null pid for carousels
9) Click, ok, ok and convert
10 After you generate a output.mpg from MainConcept use MainConceptPreProcess.sh script to change some PID according to justdvb-it expecations.
